Subcategories
Loose brake disc, without hub for the Microcar MC1 / MC2 front Diameter brake rotor: 170 mm Insert: 90 mm Depth / height: 34 mm NOTE: The Microcar MC1 and MC2 can also be a brake disk of 210 mm diameter. The article number of this disk : 100996 or 100997
Loose brake disc, without hub for the Microcar MC1 / MC2 front Diameter brake rotor: 170 mmNOTE: The Microcar MC1 and MC2 can also be a brake disk of 210 mm diameter. The part number for this drive is: 100996 or 100997
Brake disc rear imiatie. Is at 4 points fixed on the wheel hub - JDM Titane 3 - Ligier Nova - Ligier X-Too (chassisnummber t/m 9555) - Microcar Virgo 3 - Microcar MC1 - Microcar MC2 Diameter brake rotor: 170 mm
Brake pad set for Microcar MC1 and MC2 brommobiel (for 2 wheels) With E mark 4 pads with stroke switch lining: 26mm To use for the front: Microcar MC1 and MC2To use for the back: Microcar MC 1
Brake pads set rear for the Microcar M1 and MC2 brommobiel. 1 Set = 2 wheels NOTE: The first models of the MC1 have the same brake pads as the front. The part number for these pads is: 102482
This is a new brandplaatje for the atomizer of the Lombardini engine. NOTE: The convex side must face downwards to be mounted!
This is a new brandstofafsluiter (1st model) for a Lombardini FOCS 502 motor unit. (mounted in the screw-on fuel filter)
This is a new brandstofafsluiter (2nd model) for a Lombardini FOCS 502 motor unit. (mounted in the Mechanical fuel pump)